60-Second Safety CheckPressure Washing

Fill in the checks below. When you finish, download or email a PDF — assessments are not saved on this site.

STOP — CHECK THE AREA BEFORE YOU SPRAY

Slips, electric shock, flying debris and high-pressure injury can cause serious harm.

1. Job details

DateTimeHouse number / unitPostcodeFull addressCustomer / siteOperativeTeam / vanPhone

Equipment: machine, hose, lance, trigger and fittings checked for damage or leaks.
Electrics: if electric equipment is used, plug, lead, extension and RCD checked and routed safely.
Surfaces checked – no holes, loose slabs, uneven ground, ice, moss, mould or slip hazards.
Bystanders: public, pets, vehicles and fragile items kept clear – spray/debris zone controlled.
Surface and pressure settings are suitable – no risk of damaging pointing, paint or seals.
Water hose route planned to avoid trips and loss of control.
Chemicals/detergents identified, used safely, and runoff controlled.
Weather is suitable and safe footing can be maintained throughout the job.
Suitable PPE worn – eye, foot, hand and hearing protection as needed.

If electrics, unstable surfaces or unsafe runoff make the job unsafe: STOP, REASSESS before starting.

Operative signature (type name)Checked by

5. Add hazard photo to your PDF

Optional — only if a hazard is present. The image is embedded in the PDF you download or email. It is not stored on our servers.

Quick aid only — always follow training and site-specific controls. Assessments are not stored on this website.