60-Second Safety CheckGutter Vacuum Cleaning

Fill in the checks below. When you finish, download or email a PDF — assessments are not saved on this site.

STOP — LOOK UP BEFORE YOU SET UP

No pole makes unsafe work near electricity safe. Electricity can arc without contact.

1. Job details

DateTimeHouse number / unitPostcodeFull addressCustomer / siteOperativeTeam / vanPhone

Overhead power lines or service cables checked before unloading and before raising poles.
Solar panels, inverter cables, CCTV, exterior lights or other electrics nearby identified.
Vacuum, plug, cable, extension lead and RCD checked and routed to avoid trips.
Ground is firm and stable – no holes, slopes, ice, moss or slip hazards.
Public, vehicles and the work area below kept clear – falling debris zone controlled.
Poles, clamps, hose / nozzles and suction release checked for damage.
Weather is suitable – no strong wind, lightning or heavy rain.
Suitable PPE worn – eye / dust protection considered for dirty or contaminated gutters.
Correct setup chosen – work can be done safely from the ground without overreaching.

Does this job need DNO shrouding before work continues?

If any electrical danger is present or you are unsure: STOP, REASSESS and call 105 if needed.

Operative signature (type name)Checked by

5. Add hazard photo to your PDF

Optional — only if a hazard is present. The image is embedded in the PDF you download or email. It is not stored on our servers.

Quick aid only — always follow training and site-specific controls. Assessments are not stored on this website.